Description

The rig is used for various applications, water wells, mineral exploration, deep geothermal applications, coring, seismic. It can drill up to 1500 m and it can be equipped with mud pump or compressor, depending on the customer’s needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). In spite of its big dimensions and extreme power, the rig is versatile and flexible and it can be used adopting the main drilling methods: direct and reverse circulation by mud or down the hole hammer. It can be operated remotely.

Description

Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can be used with all the main drilling methods: direct and reverse circulation by mud and by down the hole hammer. It can be operated remotely.

Description

Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can be used with all the main drilling methods: direct and reverse circulation by mud and by down the hole hammer. It can be operated remotely.

Description

Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 7”1/2x8” which vastly improves drilling also in bad terrain conditions. Its versatility permits to adopt various drilling methods: direct and reverse circulation by mud and by down the hole hammer. The rig can be either crawler or truck mounted and it can be operated remotely.

Description

Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic, it is the most representative in the Massenza’s production range as although the moderate dimensions it has high technical characteristics in terms of pull-up and torque. For these reasons the rig can reach high depths, around (700m) and it is possible to work by mud pump 7”1/2 x 8”, which vastly improves drilling in bad terrain conditions. Its versatility permits to adopt various drilling methods: direct and reverse circulation by mud and by down the hole hammer. The rig can be either crawler or truck mounted and it can be operated remotely. 

Description

The rig is designed for drilling up to 450 m and is used for water wells, geothermal applications, geotechnics, coring, seismic. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling methods: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. The rig can be either crawler or truck mounted and it can be personalized according to the various customers’ requirements. 

Description

It is a very versatile drilling rig used for various applications: water wells (beyond 250 m), geothermal applications, geotechnics and seismic. The rig can be either crawler or truck mounted and he can work by all the main drilling methods: mud pump, coring, augering, down the hole hammer drilling using an adequate compressor. All controls are located for ease of operation and safety with the rig positioning controls on a fixed panel and the drilling controls on a remote rotating arm or extension cable. 

Description

Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s need. It is possible to install on board duplex mud pumps, centrifugal pumps and lubricators for down the hole hammers. The rig can be either crawler or truck mounted with the option of Massenza’s automatic drill pipe changer. The rig is designed to work with several drilling methods: direct circulation, down the hole hammers and augers. It is suitable for water well, geotechnical, geothermal drilling applications and coring for mineral research.

Description

The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and augering. All controls are located for ease of operation and safety with the rig positioning controls on a fixed panel and the drilling controls on a remote rotating arm. Numerous options are available to personalize the rig for most drilling requirements including mast extensions (folding or telescopic), SPT penetrometer, various foam and mud piston pumps and fixed or hydraulically tilting drill pipe boxes.

Description 

The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and auger drilling. Numerous optionals are available to personalize the rig for most drilling requirements including mast extensions (folding or telescopic), SPT penetrometer, various foam and mud piston pumps and fixed or hydraulically tilting drill pipe boxes.

Description 

Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. It is mounted on a crawler with extendable tracks, operated at a distance by remote control. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. The operators control panel is positioned on a rotating arm which assures an ideal working position and perfect sight of the drilling movements. Numerous options such as SPT device, hydraulic hammer, triplex pump and swing mast +/- 35, are available to personalize the rig for most drilling requirements.

Contact Us

30 - 55 Administration Road, Concord, Toronto, ON, L4K 4G9, Canada

Toll Free: +1 (855) 222-6555
Tel: +1 (905) 660-3550
Email: info@simorltd.com

 

Customer Service Hours (Eastern Time: GMT-5)

Mon 9:00 am - 5:00 pm
Tue 9:00 am - 5:00 pm
Wed 9:00 am - 5:00 pm
Thu 9:00 am - 5:00 pm
Fri 9:00 am - 4:00 pm
Sat, Sun Closed